📍We Are Based In Gauteng

Call us

061 402 6299

Email

info@paskwagaterepairs.co.za

Location

7 Poplar Ave Broadacres 2021

All Brands · Parts In Stock

Gate Motor Repairs Boksburg

Same-day Gate Motor Repairs Boksburg across Bardene, Beyers Park, Sunward Park, Impala Park, Parkrand, Bartlett, Atlasville, Vosloorus and all surrounding Boksburg suburbs. We repair Centurion, ET, Gemini, DTS and Nice gate motors with parts in stock for fast on-site repairs. Free fault diagnosis, same-day service and a 6-month workmanship guarantee on all gate motor repairs

Call For a Free Quote

061 402 6299

Request a Callback

Gate Motor Repairs Boksburg FULL SERVICE LIST

Gate Motor Repairs Boksburg Services We Offer

We provide professional Gate Motor Repairs Boksburg services for residential homes, townhouse complexes, estates, warehouses and commercial properties across Boksburg and surrounding areas. Our technicians repair Centurion, ET, Gemini, DTS and Nice gate motors affected by load shedding, damaged PCB boards, battery failure, remote faults and mechanical wear.

Boksburg experiences frequent gate motor breakdowns due to ongoing load shedding, unstable electricity supply and heavy daily gate usage across residential and industrial properties. Whether your gate motor is completely dead, stuck open, moving slowly or not responding after a power outage, we provide fast same-day gate motor repairs throughout Boksburg.

PCB Control Board Repairs & Replacement

Load shedding and Eskom restoration spikes frequently damage gate motor PCB boards across Boksburg. Modern gate motors rely on sensitive electronic systems that can fail suddenly when power returns.

Our technicians carry common PCB boards in stock for same-day gate motor repairs across Boksburg.

Preventative Gate Motor Maintenance

Routine maintenance helps prevent expensive breakdowns and improves gate motor reliability, especially for high-cycle gates in estates, complexes and business properties.

Preventative servicing is strongly recommended for Boksburg properties exposed to frequent load shedding and heavy daily usage.

Load Shedding & Surge Repairs

Power restoration spikes after load shedding are one of the leading causes of PCB board failure throughout Boksburg. We install surge protectors to help protect gate motor electronics from future electrical damage.

We replace damaged batteries, control boards, chargers and fit surge protection systems to prevent future failures. Same-day repair available for most brands.

Gearbox & Mechanical

Grinding noises, gate stalling, slow movement and motors running without moving the gate are usually signs of gearbox wear or mechanical failure.

Most mechanical repairs are completed during the same visit throughout Boksburg.

Gate Motor Battery Replacement

Weak or damaged batteries are one of the leading causes of gate motor failure during load shedding. Gates in complexes, estates and commercial properties across Boksburg often experience faster battery deterioration because of frequent daily cycling.

Every battery replacement includes battery testing, charging circuit inspections and voltage checks to prevent repeat failures.

Remote Programming & Receiver Repairs

Remote and receiver failures are extremely common after electrical surges and load shedding events. In many cases all remotes stop working simultaneously because the receiver module has been damaged.

We stock remotes and receivers for Centurion, ET, Gemini, DTS and Nice gate motors for same-day repairs.

Gate Motor Repairs Boksburg

Boksburg's Trusted Gate Motor Repair Specialists

Boksburg has a wide mix of older residential suburbs, newer estate developments and high-traffic commercial properties — creating very different failure patterns for Gate Motor Repairs Boksburg across the area.

Established suburbs such as Bardene, Sunward Park, Beyers Park and parts of Witfield still contain large numbers of DTS Elite, ET Drive and older Centurion D5 gate motors installed during the 2000s and early 2010s. These older systems are especially vulnerable to load shedding damage, with PCB board failure remaining one of the most common Gate Motor Repairs Boksburg callouts we attend. DTS receiver modules and ET Drive control boards are particularly sensitive to Eskom restoration spikes and often fail the moment power returns after an outage.

Many Boksburg homeowners only realise the damage after the gate suddenly stops responding, all remotes fail simultaneously or the motor appears completely dead with no LED activity. In many cases, the motor mechanism itself is still functional — the failure is isolated to the PCB board, receiver module or charging circuitry damaged by the surge.

Gate Stopped After Load Shedding in Boksburg?

Load shedding and Eskom restoration spikes are the biggest cause of gate motor failure across Boksburg. We carry DTS Elite, ET Drive, Centurion D5, D5-Evo, D5 Smart, D6 Smart, D10 Smart, D10 Turbo Smart, Nice ROBUS and Gemini control boards in stock for fast same-day Gate Motor Repairs Boksburg.

All Boksburg Suburbs We Cover

Gate Automation and Electrical Services

We offer a full spectrum of services to keep your Gauteng property secure, automated, and accessible.

Bardene

Established residential. DTS Elite & D5-Evo. Board & receiver failures common. 35–40 min.

Hyperion

Residential & cluster. D5-Evo & Gemini Slider. Load shedding board damage frequent.

Sunward Park

Established residential. DTS Elite & ET Drive mix. Older motors — receiver faults very common.

Selcourt

Newer cluster estates. D5-Evo & Gemini. Better surge protection on newer installs. 40–45 min.

Vosloorus

Residential. D5-Evo & Gemini Slider. All brands serviced. Same-day availability. 40–50 min.

Impala Park

Residential. DTS Elite & D5-Evo. Board & receiver failures most common faults.

Witfield

Mixed residential & light industrial. D5-Evo & D10 Smart commercial. All brands.

Parkrand

Cluster estates. Gemini Slider & D5-Evo. Capacitor faults common in Gemini cluster installs.

Boksburg North

Residential. D5-Evo & Gemini. Load shedding board failures most frequent callout.

Boksburg CBD

Commercial & mixed residential. All brands. D10 Smart on commercial properties & heavy gates.

Gate Motor Brands We Repair in Boksburg

Every Brand — Parts in Stock

The brands installed across Boksburg, what specifically goes wrong with each model in this area, and what it typically costs to fix.

Centurion D5 / D5-Evo Gate Motor

Standard on newer Boksburg cluster estate developments from 2015 onwards. Better surge protection than DTS and ET Drive, but still vulnerable to severe surges without a dedicated surge protector. D5-Evo boards in stock for same-day Boksburg repair. We recommend adding a surge protector (R450–R900) on every repair callout if not already fitted.

Best For

Residential sliding gates

Most Common Fault

Surge-damaged control board

Repair Cost Range

R1,800 – R6,500

Centurion D10 Smart Gate Motor

Found on commercial and industrial properties in Witfield industrial area and Boksburg CBD — heavy commercial gates requiring D10 Smart capacity. When a commercial D10 fails, the operational impact is immediate. D10 Smart boards and motor components in stock for same-day Boksburg repair.

Best For

Heavy-duty / large gates

Most Common Fault

Motor winding failure

Repair Cost Range

R3,200 – R9,000

Centurion R5 / Vantage Gate Motor

The Centurion R5 and Centurion Vantage are both swing gate motors, but they are designed for different applications, performance levels, and gate types.

The Centurion R5 gate motor is a rotary arm swing gate motor ideal for domestic and light-industrial use, such as homes, complexes, and small business entrances. It is designed for gates up to 3.5m per leaf and ±250kg, offering smooth, quiet operation, battery backup, and easy installation.

Best For

Swing gates

Most Common Fault

Limit switch / ram seal

Repair Cost Range

R1,200 – R5,500

Nice ET Drive 500 / 1000 Gate Motor

Found in older Sunward Park, Bardene and Impala Park residential properties. ET Drive PCBs are fragile under load shedding surges. Same diagnostic approach as DTS: button works = receiver module. Nothing works = full PCB board. ET Drive receiver modules and boards in stock for same-day Boksburg repair.

Best For

Budget sliding gates

Most Common Fault

PCB board failure

Repair Cost Range

R1,400 – R5,000

Gemini Slider 12AH Gate Motor

Common in Parkrand, Selcourt and Boksburg North cluster home complexes. Gemini's 12Ah battery provides excellent load shedding resilience but capacitor failure remains the most frequent fault — hums but doesn't move the gate = capacitor (R550–R1,200, under 1 hour). Gemini capacitors and boards in stock for same-day Boksburg repair.

Best For

Residential / light commercial

Most Common Fault

Motor capacitor failure

Repair Cost Range

R1,200 – R4,500

DTS Elite 600 & Arrow Gate Motor

Very common in Boksburg's established suburbs — Bardene, Sunward Park and Impala Park. DTS receiver modules are extremely vulnerable to load shedding surges. The receiver burns out while the main board often survives, making DTS one of the most cost-effective repairs when correctly diagnosed. All remotes dead but button works = receiver module (R700–R1,400, under 1 hour). Nothing works = PCB board (R1,200–R2,500, same day). We carry DTS Elite 600 and Arrow parts in stock for same-day Boksburg repair.

Best For

Residential

Most Common Fault

Remote receiver fault

Repair Cost Range

R1,000 – R4,000

Nice ROBUS 600 & 1000 Gate Motor

Common in Sandton's premium estates and large freestanding properties — particularly Hyde Park, Bryanston, Illovo and Sandhurst. The ROBUS 1000 handles heavy estate gates quietly and smoothly. Logic board failure after severe load shedding surges is the primary fault. The 24V dual-battery system means both batteries must be replaced simultaneously. We carry ROBUS boards and battery pairs in stock for same-day repair.

Best For

Light residential

Most Common Fault

Logic board failure

Repair Cost Range

R1,200 – R4,500

Gate Motor Brands We Repair in Boksburg

Centurion D5 vs D5-Evo vs D5 Smart — What's the Difference?

The most common gate motor question we receive from Boksburg homeowners. These three models look nearly identical from the outside but differ significantly in board quality, surge protection and features. If you don't know which model you have, check the label inside the motor housing lid.

Centurion D5 (Original) Gate Motor

  • Gates up to 500kg
  • Gen 1 - Board generation
  • No Surge protection
  • No LCD display / error codes
  • Not DOSS (Digital Origin Seeking)
  • No Bluetooth / App control
  • No Remote diagnostic via app

Centurion D5-Evo Gate Motor

  • Gates up to 500kg
  • Gen 2 -Board generation
  • Basic onboard Surge protection
  • LCD with codes
  • Full DOSS
  • No Bluetooth / App control
  • No Remote diagnostic via app

Centurion D5 Smart Gate Motor

  • Gates up to 500kg
  • Gen 3 -Board generation
  • Enhanced + TVS diodes Surge protection
  • LCD + app alerts
  • Full DOSS
  • Centurion Connect app
  • Full app diagnostics

Paskwa Tip for Boksburg D5 Owners

If you have the original Centurion D5 (no LCD screen, no DOSS), we strongly recommend upgrading to a D5-Evo spec board on the same callout when your board is replaced after load shedding damage. The upgrade cost difference is R400–R600 and gives you significantly better surge protection going forward. Many Boksburg D5 owners have had boards replaced 2–3 times without this upgrade.

Gate Motor Symptom Boksburg

Gate Motor Beeping in Boksburg? Decode It Here

Centurion D5-Evo uses audible beep codes — common in Selcourt, Parkrand and Boksburg North newer installs. DTS Elite and ET Drive use LED indicators. Count Centurion beeps and match below.

Note: Nice ROBUS and Gemini use LED flash patterns rather than audible beeps for fault indication. Call us for model-specific LED diagnostic guides for Boksburg residents.

2 Short Beeps (repeating)

Power failure detected. The motor is running on battery backup only — mains supply has been cut (load shedding or tripped breaker).

Action: Check if your mains power is on. If load shedding — normal operation. If mains is on — check the breaker and fuse. Battery still operational.

3 Beeps (periodic)

Low battery warning. Battery voltage has dropped below threshold — the motor will fail to operate the gate during the next power outage.

Action: Replace the battery within the next 2 weeks. R650–R950 for most Boksburg brands. Do not ignore — next load shedding outage will leave your gate stuck.

4 Beeps every 10s

Collision detected or obstruction on track. The gate hit something, ran into an end-stop, or DOSS detected an anomaly on the travel path.

Action: Check the gate track for debris, stones or objects. Check that the gate moves freely by hand. Check safety beams are clean and aligned. Call us if persists.

Continuous single beep

Motor jammed, drive failure or end-stop fault. Gate is stuck mechanically or the motor drive circuit has failed (often after a power surge).

Action: Do not keep pressing the remote — this strains the motor. Use manual release to free the gate. Call 061 402 6299 — this usually needs a technician.

DTS or ET Drive Completely Dead in Boksburg?

If your DTS or ET Drive gate motor is completely dead after load shedding — no LEDs, no movement and no response from the remotes — the first thing we need to know is whether the gate responds when pressing the button directly on the motor housing.

Gate Motor Help Boksburg

How to Manually Open Your Gate During Load Shedding

Boksburg most-searched gate motor query. If your gate is stuck and you need to open it manually right now — follow these steps, then call us to fix the underlying fault same day.

⚠️ Safety First

Never disengage the motor on a sloped driveway without someone holding the gate. Once disengaged, the gate rolls freely and can seriously injure people or damage vehicles. If in doubt — call us first: 061 402 6299

General Steps — All Sliding Gate Motors

Find the Release Key/Lever

Every gate motor has a manual release — a key lock, red lever or pull-cord on the motor housing. Check the side or rear face. Your installer should have left you a flat manual release key on installation

Disengage from the Rack

Turn the key or pull the lever to disengage the motor's pinion gear from the gate rack. You'll feel or hear a click when properly disengaged. The motor no longer drives the gate.

Push the Gate Manually

The gate should now roll freely on its wheels. Push it open or closed by hand. If it doesn't roll easily, the issue may be the wheels or track — not the motor. Don't force it.

Re-Engage After Power Returns

Push the gate back to fully closed or open position and re-engage the motor (reverse step 2). Press remote — the motor re-learns limits on first operation. Call us if it doesn't re-engage.

Brand-Specific Instructions — Boksburg

Centurion D5 / D5-Evo / D5 Smart / D6 Smart

Insert the flat manual release key into the keyhole on the motor's front face. Turn 90° clockwise. Gate can now be pushed manually. To re-engage: turn back counter-clockwise and remove key. Motor auto-learns limits on next remote press.

Centurion D10 Smart / D10 Turbo Smart

Pull the red/orange lever on the underside of the motor housing toward you to disengage the clutch. Gate is free to push. Push lever back in firmly to re-engage. Note: D10 estate gates are very heavy — have assistance before releasing.

Nice ROBUS 600 / 1000

Insert the key into the front cover's key slot. Turn to the open padlock symbol (🔓). Slide gate by hand. To re-engage, turn to locked padlock (🔒). ROBUS auto-runs a limit reset on first remote operation after re-engagement.

Gemini Slider 12AH / Pro 24V

Pull the orange release handle outward firmly — it clicks into disengaged position. Push gate by hand. Push handle back in until it clicks to re-engage. Gemini requires a limit-learn cycle — hold remote and gate re-learns its travel.

ET Drive 500 / 1000

Insert key into motor housing (front or side). Turn to open padlock symbol. Motor disengages from rack. To re-engage: turn to locked symbol and remove. Press and hold remote button to reset limits after re-engagement.

DTS Elite 600 / Arrow

Red or orange lever on the side of the motor casing. Pull outward to disengage. Push gate manually. Push lever firmly back in to re-engage. DTS auto-detects gate position on next remote operation.

Gate Won’t Re-Engage After Power Returns?

DTS and ET Drive gate motors are especially prone to re-engagement problems after load shedding and Eskom restoration surges. Many Boksburg homeowners experience the same issue — the gate was manually disengaged during the outage, but once power returns the motor refuses to lock back into automatic mode.

Fault Diagnosis — Boksburg Gate Motors

What's Wrong with Your Gate? Diagnose It Here

The most common gate motor faults we diagnose and repair across Boksburg every week — with likely causes and what it costs to fix in 2026.

  • $
    Completely dead after load shedding
  • !
    Likely Cause
  • $
    Surge-destroyed PCB control board — #1 Boksburg fault
  • $
    Beeping 2 times repeatedly
  • !
    Likely Cause
  • $
    Load shedding / mains power failure — running on battery
  • $
    Beeping 3 times periodically
  • !
    Likely Cause
  • $
    Low battery warning — battery near end of life
  • $
    4 beeps every 10 seconds
  • !
    Likely Cause
  • $
    Obstruction on track or DOSS collision detection fault
  • $
    Hums but doesn't move gate
  • !
    Likely Cause
  • $
    Capacitor failure (Gemini, ET, older Centurion)
  • $
    Reverses before fully opening
  • !
    Likely Cause
  • $
    Limit switch misalignment or physical obstruction on track
  • $
    One remote stopped, others work
  • !
    Likely Cause
  • $
    Flat remote battery or lost programming after board reset
  • $
    Opens but won't close (or vice versa)
  • !
    Likely Cause
  • $
    IR safety beam misaligned, dirty lens, or spider web on sensor
  • $
    No response from any remote
  • !
    Likely Cause
  • $
    Receiver module burned by surge (DTS, ET especially)
  • $
    Moving very slowly
  • !
    Likely Cause
  • $
    Worn motor brushes, weak battery or sticky rack/wheels
  • $
    Grinding noise on every operation
  • !
    Likely Cause
  • $
    Dry or degraded gearbox oil — most preventable fault in Boksburg
  • $
    Gate opens randomly by itself
  • !
    Likely Cause
  • $
    Remote frequency interference or faulty receiver

 Gate Motor Question

Claiming Gate Motor Damage on Home Insurance

Load shedding board damage is claimable under home insurance power surge cover. Many Boksburg homeowners pay out of pocket when they could claim.

Confirm Power Surge Cover

Call your insurer and confirm your policy includes "power surge" or "electrical surge" cover. Most standard home insurance policies in South Africa include this, but check your schedule of benefits to confirm your excess amount.

Get a Written Diagnosis

You need a written fault diagnosis report from a qualified technician confirming that power surge damage is the cause of failure — not wear-and-tear or improper installation. We provide this report on every Boksburg callout at no additional charge.

Get a Parts + Labour Invoice

Your insurer needs an itemised invoice showing the part replaced (e.g. "Centurion D5-Evo PCB control board") and the labour cost. We issue this automatically on completion of every repair. Most policy excess amounts are R500–R1,500.

Submit Your Claim

Submit the fault diagnosis report and invoice with your claim form. Load shedding surge repairs costing R2,000+ are generally worth claiming. Smaller repairs (remote, battery) typically don't exceed the excess and are not worth claiming.

We Provide All Insurance Documentation

Our written fault diagnosis report is accepted by all major South African insurers including Outsurance, Santam, Discovery Insure, Old Mutual Insure, Hollard and King Price. We issue it automatically on every Boksburg repair callout — you don't need to ask. Call 061 402 6299 and mention you'll need an insurance claim report.

Security Upgrades — Boksburg Gate Motors

Protect Your Motor — Upgrades for Benoni

Gate motors are a common theft target in Boksburg. We install all the following on any callout or as a standalone visit — most take under 30 minutes and dramatically reduce theft risk and surge damage

Anti-Theft Cage

Heavy steel cage bolted over motor housing — makes removal extremely difficult. Best deterrent against gate motor theft in Boksburg's residential suburbs.

Surge Protector

Prevents the #1 Boksburg gate motor fault permanently. Critical for DTS Elite, ET Drive and Centurion D5-Evo in Boksburg. Fitted on any callout in under 30 minutes.

Solar Backup + Larger Battery

Keeps battery topped up during extended Boksburg load shedding. Gate operates through 4–6 hours of outage instead of 1–2 hours.

Rolling Code Remotes

Older DTS and ET Drive fixed-code remotes can be cloned. Rolling-code remotes are impossible to clone. We upgrade receivers and remotes on all major Boksburg brands.

Replace DTS/ET with D5-Evo

Best long-term upgrade for older Boksburg DTS and ET Drive owners. Centurion D5-Evo — better surge protection, manufacturer warranty, 10–15 year lifespan.

Serial Number Engraving

Your motor's serial number engraved visibly onto the casing deters theft by making resale significantly harder. Low cost, permanent deterrent. Done on any callout in under 5 minutes.

Full Service Offering — Boksburg

Everything Your Boksburg Property Needs

Gate motors are our core business — but we cover all security and automation needs across Boksburg under one roof, with the same same-day service and guarantee.

Gate Motor Installation and Repairs

All brands repaired across Boksburg. DTS Elite, ET Drive, Centurion D-series and Gemini specialists. Parts in stock. Same-day service.

Garage Door Motor Installation and Repairs

Roller, sectional and tilting garage door motor repairs and installation. All brands — Nice TOONA, Centurion garage range, Gemini and Digidoor.

Electric Fence Installation and Repairs

Electric fence installation, repairs and compliance certificates across Boksburg and the East Rand.

Intercom System Installation

Video and audio intercom installation and repairs. All major brands — Dahua, Hikvision and Urmet. Integration with gate motor and CCTV.

CCTV Installation and Repairs

HD security camera systems installed across Boksburg. Remote viewing and motion alerts included.

Steel Palisade and Weld-Mesh Fencing

Palisade and weld-mesh fencing supply and installation across Gauteng.

Why Boksburg Chooses Paskwa

Boksburg's Trusted Gate Motor Specialists

There are companies that say they serve . Then there is Paskwa — based here, working Boksburg here every day since 2008, with accreditation that guarantees your motor's manufacturer warranty stays intact.

Call for a free quote

061 402 6299

24/7 Emergency Line Available

Based in Sandton

7 Poplar Avenue, Broadacres. Most Boksburg properties 15–30 minutes away — faster than any competitor from JHB central or East Rand.

Accredited Installer

Centurion Systems and Nice ROBUS accreditation means your motor warranty stays valid. Non-accredited repairs can void manufacturer warranty on motors under 5 years old.

All Parts in Stock

Centurion D5 through D10 Turbo, Nice ROBUS 600/1000, Gemini, ET and DTS boards carried in our service vehicles. Same-day repair without waiting for parts.

24/7 Emergency Line

Gate stuck at midnight in Bryanston or stuck open at 5am in Morningside — we're on call around the clock. Security in Boksburg cannot wait until Monday.

Customer Reviews

What Boksburg Customers Say About Us

DTS Elite in Bardene — all remotes dead after load shedding but gate worked from button. Paskwa diagnosed the receiver module over the phone, arrived 38 minutes later with the right part and had it working within an hour. They knew the fault before arriving. Excellent service.
Danie P.
Bardene, Boksburg
Gemini Slider in Parkrand cluster complex — humming but gate not moving. Paskwa arrived with the capacitor in their vehicle, had it replaced in 45 minutes. Very affordable. Body corporate is now using them for all the complex gate motors. Quick, professional, honest pricing.
Body Corporate Manager
Parkrand, Boksburg
D5-Evo in Selcourt dead after load shedding. Paskwa arrived within 40 minutes, replaced the board AND fitted a surge protector on the same visit. First company that proactively suggested the surge protector without being asked. Haven't had a problem since. Highly recommended.
Lynne S.
Selcourt, Boksburg

FAQ — Gate Motor Repairs Boksburg

Boksburg Gate Motor FAQ

How quickly can you reach Boksburg?

From our Broadacres, Sandton base: Bardene and Hyperion are 35–40 minutes. Sunward Park and Selcourt are 40–45 minutes. Vosloorus and Impala Park are 40–50 minutes. Same-day service on all standard callouts. 24/7 emergency line — call 061 402 6299 any time.

My DTS Elite remotes are dead but the button on the motor works — what is wrong?
This is almost certainly the DTS Elite receiver module — burned by a load shedding surge. The receiver module receives your remote signal. When it fails, all remotes stop working but the motor itself responds to the button on the housing. Receiver module replacement costs R700–R1,400 and takes under an hour. We carry DTS Elite receiver modules in stock for same-day Benoni repair. Call 061 402 6299 — we can confirm this diagnosis over the phone before attending.
What gate motor brands are most common in Boksburg?

Boksburg's established suburbs (Bardene, Hyperion, Sunward Park) have DTS Elite, ET Drive and older Centurion D5 installations. Newer cluster estates (Selcourt, Parkrand, Boksburg North) use Centurion D5-Evo and Gemini Slider 12AH. Commercial properties near the East Rand Mall and Witfield use Centurion D10 Smart. We carry parts for all in stock for same-day repair.

What is the difference between the Centurion D5, D5-Evo and D5 Smart?
The original D5 has no LCD display, no DOSS system and the least surge protection — it is the most vulnerable model to load shedding damage. The D5-Evo adds an LCD display showing error codes, the DOSS digital origin-seeking system, and improved board surge handling — the recommended repair upgrade from the original D5. The D5 Smart adds Bluetooth, Centurion Connect app control and remote diagnostics — the best choice for new installations. If you have the original D5, we recommend upgrading to D5-Evo spec board on the same callout when your board is replaced — the difference is only R400–R600.
Should I repair or replace my gate motor?

We use the 60% rule: if repair cost exceeds 60% of the installed price of a new motor, and the motor is over 10 years old, replacement usually makes better financial sense. A D5 board replacement at R2,500 on a 6-year-old motor with no prior repairs = repair. The same R2,500 on a 12-year-old motor that has had 3 repairs in 2 years = replace. We always give you both options with honest advice — never any pressure in either direction. Use our Repair vs Replace tool on this page for a quick calculation.

How much does gate motor repair cost in Boksburg?

Repairs range from R350 for a remote reprogram to R9,000 for a motor winding repair. The most common Boksburg repairs: DTS Elite receiver module R700–R1,400; DTS PCB board R1,200–R2,500; ET Drive receiver module R700–R1,400; D5-Evo board R2,200–R3,800; Gemini capacitor R550–R1,200. Free diagnosis and quote before starting. No call-out fee for Boksburg.

Does home insurance cover gate motor damage from load shedding?

Yes — most South African home insurance policies include power surge cover, and load shedding restoration spikes qualify. You need: (1) a written fault diagnosis report confirming surge damage as the cause — we provide this at no extra charge on every callout, (2) an itemised repair invoice, and (3) your insurer's claim form. Typical policy excess is R500–R1,500, making claims worthwhile for board replacements of R2,000+. We provide documentation accepted by Outsurance, Santam, Discovery Insure, Old Mutual, Hollard and King Price.

Do you repair commercial gate motors near the East Rand Mall in Boksburg?

Yes — we service commercial and residential gate motors across all Boksburg suburbs including the East Rand Mall precinct, Witfield industrial area and Boksburg CBD. We carry commercial-grade D10 Smart and Nice ROBUS 1000 components for commercial gate applications. We work within commercial site security protocols. Call 061 402 6299 for commercial site assessments and quotes.

My gate motor remote is not working — what should I check?

Step 1: Replace the remote battery (CR2032 or A23) — flat batteries cause 40% of remote faults. Step 2: Test if the gate responds to the button on the motor itself — if yes, the remote needs reprogramming or replacement (R350–R700). Step 3: If all remotes are dead and the motor is completely unresponsive, the receiver module is likely burned by a load shedding surge (R700–R1,400, in stock for same-day repair). Step 4: If the gate works by button and remote but opens randomly on its own, you have a frequency interference or receiver fault — also R700–R1,400 to fix. Call 061 402 6299 for phone diagnosis before we attend.

Does home insurance cover gate motor surge damage in Boksburg?

Yes — most South African home insurance policies cover power surge damage. DTS and ET Drive board replacements (R1,200–R3,200) and D5-Evo boards (R2,200–R3,800) are worth claiming given most excesses are R500–R1,500. We provide written fault diagnosis reports accepted by all major South African insurers at no extra charge on every Boksburg callout.

Does home insurance cover gate motor surge damage in Benoni?

Yes — most South African home insurance policies cover power surge damage, and load shedding restoration spikes qualify. DTS and ET Drive board replacements (R1,200–R3,200) are generally worth claiming given most excesses are R500–R1,500. We provide written fault diagnosis reports accepted by all major South African insurers at no extra charge on every Benoni callout.

Are you a certified gate motor installer in Boksburg?

Yes — Paskwa Gate Repairs is an accredited Centurion Systems and Nice ROBUS installer. This keeps your motor's manufacturer warranty intact — particularly important for newer Selcourt and Parkrand D5-Evo installations still under warranty. All our technicians have minimum 10 years gate motor experience

How often should I service my gate motor in Boksburg?

Residential Boksburg properties: every 12 months. Critical service items for Boksburg's older DTS and ET Drive motors are gearbox oil and battery checks — many have never been serviced in 12–15 years. An annual gearbox service at R450–R900 prevents premature motor failure and often extends motor life significantly.

What is the lifespan of a gate motor in Boksburg?

A well-maintained gate motor on a residential Boksburg property should last 10–15 years. With regular gearbox servicing, surge protection and annual maintenance, some Centurion D5 units have remained operational for 18+ years. The three biggest lifespan factors in Sandton are: (1) surge protection — an unprotected D5 may have 3–4 board replacements before the mechanism also fails, (2) gearbox oil — changed annually, this alone can add 5+ years to motor life, and (3) correct motor selection — an undersized motor working at 90% of rated capacity wears out in 5–6 years instead of 12+.

Have a different Question?

Get In Touch

Get Your Boksburg Gate Fixed Today

Speak directly to our dispatch team — no call centres. Tell us your suburb and fault for same-day Boksburg repair.

  • 061 402 6299 — Call or WhatsApp
  • info@paskwagaterepairs.co.za
  • 7 Poplar Avenue, Broadacres, Sandton, 2021
  • Mon–Fri: 07:00–18:00 | Sat - Sun: 07:00–14:00
  • 24/7 Emergency Line available

Book a Free Quote

Where We Work

Areas Near Boksburg We Also Serve

Sandton is our home base — we cover all of Johannesburg North and surrounding Gauteng areas with the same same-day service.

  • $
    Alberton
  • $
    Douglasdale
  • $
    inanda
  • $
    Morningside
  • $
    Saxonwold
  • $
    Bedfordview
  • $
    East Rand
  • $
    Johannesburg
  • $
    Randburg
  • $
    Benoni
  • $
    Edenvale
  • $
    Kyalami
  • $
    Roodepoort
  • $
    Bryanston
  • $
    Fourways
  • $
    Melrose Arch
  • $
    Rosebank
  • $
    Centurion
  • $
    Hyde Park
  • $
    Midrand
  • $
    Sandton

Not listed? We cover all of Gauteng — call 061 402 6299 to confirm availability for your area.