📍We Are Based In Gauteng

Call us

061 402 6299

Email

info@paskwagaterepairs.co.za

Location

7 Poplar Ave Broadacres 2021

DTS Gate Motor Repairs

DTS Gate Motor
Repairs Johannesburg

Paskwa Gate Repairs specialises in DTS gate motor repairs Johannesburg & Gauteng, including DTS Elite 600, DTS Arrow, DTS swing gate and underground systems. Control units, receivers, batteries and remotes in stock. Same-day load-shedding damage repairs from R350 with a 6-month guarantee.

061 402 6299
WhatsApp Us

Call For a Free Quote

061 402 6299

Request a Callback

DTS Gate Motor Repairs Johannesburg FULL SERVICE LIST

DTS Gate Motor Repair Services We Offer in Johannesburg

We provide professional DTS gate motor repairs in Johannesburg for residential, commercial and industrial properties. Our technicians repair DTS sliding gate motors and DTS swing gate motors affected by load shedding, damaged control boards, faulty batteries, remote receiver problems and mechanical failures.

DTS Gate Motor Battery Repairs

If your DTS gate motor struggles during load shedding or stops working when the power goes off, the battery or charging system may be faulty. We replace DTS gate motor batteries, repair chargers and test backup systems for reliable operation.

We install long-lasting batteries designed for frequent Johannesburg power outages.

DTS Gate Motor Remote Repairs

We repair DTS gate motor remotes, faulty receivers and signal connection issues. If your remote stopped working after load shedding or the gate no longer responds correctly, we can diagnose and repair the fault quickly.

New DTS remotes and receiver replacements are also available.

Emergency DTS Gate Motor Repairs

A faulty DTS gate motor can become a serious security issue for homes and businesses. We provide emergency DTS gate motor repairs for gates that suddenly stop working, remain stuck open or fail after electrical surges.

Our technicians carry common DTS spare parts for fast on-site repairs across Johannesburg.

DTS Gate Motor Maintenance & Servicing

Regular servicing helps prevent costly breakdowns and extends the lifespan of your DTS gate motor system. Our maintenance service includes battery testing, lubrication, rack inspections, beam alignment and complete system checks.

Routine DTS gate motor servicing improves reliability and reduces unexpected failures caused by daily use and load shedding.

DTS Sliding Gate Motor Repairs

We repair DTS sliding gate motors that are noisy, stuck, off-track or failing to close properly. Common faults include damaged gear racks, worn wheels, motor alignment issues and gearbox failures.

Our technicians provide fast DTS sliding gate motor repairs for homes, businesses and commercial properties across Johannesburg.

DTS Swing Gate Motor Repairs

We provide reliable DTS swing gate motor repairs for residential estates, complexes and business properties. Common problems include actuator arm failures, slow gate movement, alignment issues and gates that only open on one side.

We repair and service all major DTS swing gate systems throughout Johannesburg.

DTS Gate Motor Repairs Johannesburg

Johannesburg's DTS Repair Specialists

DTS is one of the most widely installed budget gate motor brands in Johannesburg, popular for its affordability, straightforward installation, and low cost of ownership. The DTS Elite 600 is the dominant residential sliding gate motor in its price bracket, while the DTS Arrow and swing gate range cover lighter-duty and swing gate applications across Gauteng.

DTS's biggest advantage: DTS gate motors are the most cost-effective to repair of any major brand in Johannesburg. Control units and receiver modules are readily available, competitively priced, and straightforward to replace. Where a Centurion D5 board replacement costs R1,800–R3,200, the equivalent DTS control unit repair typically costs R1,000–R2,500 — making repair almost always economical even on older motors.

DTS motors have a distinct fault profile compared to premium brands. The most common fault — by a significant margin — is receiver unit failure after load-shedding surge damage. Unlike Centurion and ET where the main PCB board tends to fail, on DTS the receiver circuit often burns out independently while the main control board remains functional. This makes DTS repairs particularly economical: a receiver replacement (R700–R1,400) rather than a full board replacement.

We carry DTS control units, receiver modules, batteries, capacitors and remotes in our service vehicles for same-day repair across all of Johannesburg and Gauteng.

DTS Elite 600 Gate motor stopped after load shedding? We have your board in stock - Call 061 402 6299

The DTS Elite 600 control board is the single most commonly replaced component in Johannesburg gate motor repairs. We carry it in stock. 

Model Deep-Dive -  DTS Gate Motor Repairs Johannesburg

DTS Models — Faults, Costs & Repairs

Select your DTS model for specific fault information, repair costs and what to expect from a same-day callout.

DTS Elite 600 Gate Motor

The DTS Elite 600 is a 12V DC residential sliding gate motor rated for gates up to 600kg. It is one of the most popular budget sliding gate motors in Johannesburg, widely installed across residential estates, townhouse complexes and freestanding properties where cost-effectiveness is the priority. The Elite 600 offers solid performance at a price point well below Centurion, with the trade-off of a receiver module that is more vulnerable to load-shedding surge damage than premium brands.

Common Faults

Receiver Module Failure

The most common DTS Elite 600 fault in Johannesburg and the characteristic failure pattern that distinguishes DTS from other brands. Where a Centurion or ET motor typically suffers full PCB board failure after a load-shedding surge, the DTS Elite 600's receiver circuit often burns out independently — leaving the main control board functional. The gate can still be opened using the physical button on the motor, but the remote does not work. Receiver module replacement is a quick, economical repair — typically under an hour and significantly cheaper than a full board replacement on other brands.

Control Unit (PCB) Failure

Full control unit failure occurs on the DTS Elite 600 when the load-shedding surge is severe enough to destroy the entire board rather than just the receiver circuit. The gate is completely dead — no LED, no response to the remote or the physical button on the motor housing. The motor winding and mechanical components are almost always undamaged. DTS control units are more affordable to replace than equivalent boards on premium brands, making full board failure still a cost-effective repair.

Battery Backup Failure

The DTS Elite 600 uses a 12V 7Ah sealed lead-acid battery for backup power during load shedding. Under Johannesburg's load-shedding conditions — multiple daily discharge and recharge cycles — the battery lifespan drops from the rated 2–3 years to as little as 12–18 months. Test by switching off your mains DB and trying the remote. If the gate doesn't respond, the battery needs replacing. Battery replacement is a quick, affordable callout that prevents being stranded. We carry DTS-compatible 7Ah batteries in stock at all times.

Safety Sensor / Photo Eye Fault

The DTS Elite 600's infrared safety beam prevents the gate closing on an obstruction. If the beam is misaligned, dirty, or one unit has failed, the motor reverses. Common after manual gate operation during a power outage, which can knock the beams out of alignment. Sensor realignment or replacement is one of our most affordable and quickest callouts — usually under an hour.

Limit Switch Misalignment

The DTS Elite 600 uses limit switches to define the gate's stop positions. These shift if the gate has been manually operated during an outage or if the gate track has moved. Realignment is a straightforward on-site adjustment requiring no parts in most cases.

Capacitor Failure

The DTS Elite 600's starting capacitor provides the initial torque burst needed to get the motor moving from a standstill. When it fails, the motor energises and makes noise — but cannot generate enough torque to start the gate moving. Common on motors over 4 years old or those driving gates heavier than the rated 600kg. Capacitor failure is one of the quickest and most affordable DTS repairs — typically completed in under an hour.

DTS Arrow Gate Motor

The DTS Arrow is a lighter-duty sliding gate motor rated for gates up to 400kg. It is used in smaller residential properties, cluster home complexes and entrances where the gate weight is well within the lighter specification. It shares the same receiver vulnerability as the Elite 600 but at a lower price point for both the motor and repairs. The Arrow is known for its compact footprint and simple installation.

Common Faults

Receiver Module Failure

Same characteristic fault as the Elite 600 — the DTS Arrow receiver circuit burns out from load-shedding surge damage while the main control board remains functional. Receiver module replacement is fast and affordable. We carry Arrow receiver modules in stock for same-day repair.

Capacitor Failure

Capacitor failure is slightly more common on the DTS Arrow than on the Elite 600, because the Arrow is more frequently installed on gates approaching or slightly exceeding its 400kg rating — placing extra starting load on the capacitor. Same repair process as the Elite 600 — quick, same-day, inexpensive.

Motor Overload

The DTS Arrow is frequently installed on gates heavier than its 400kg rating to save cost. An overloaded Arrow runs hot, trips its thermal overload protection, and has a dramatically shortened lifespan. If the motor consistently stops after a few operations and resets after cooling, overloading is almost certainly the cause. In this scenario we assess whether the gate can be lightened (removing infill, checking balance) or recommend upgrading to the Elite 600

Battery Backup Failure

The DTS Arrow uses a 12V 7Ah battery with the same load-shedding vulnerability as the Elite 600. Under Johannesburg's load-shedding conditions, expect to replace every 12–18 months. Test by switching off your DB mains and trying the remote. We carry Arrow batteries in stock for same-day replacement.

DTS underground Gate Motor

DTS underground gate motors are concealed below the gate posts, driving the gate leaf via a buried actuator arm. They are popular in upmarket Johannesburg residential properties where a visible motor arm would spoil the aesthetic of the entrance. DTS's underground range offers a more affordable entry point to concealed automation than Italian alternatives like FAAC or BFT. The underground installation environment creates a unique fault profile — moisture and water ingress are the primary long-term risks.

Common Faults

Hydraulic Seal Failure / Oil Leak

DTS underground motors are hydraulic actuators — they extend and retract using hydraulic fluid pressure. The seals containing this fluid degrade over time, particularly in Johannesburg's clay-heavy soil which expands and contracts seasonally. A leaking seal loses pressure and the gate movement becomes weak, slow, or stops entirely. Oil visible on the ground near the gate post is a clear sign of seal failure. Seal replacement is the correct repair — not a new motor. We carry DTS underground seal kits for the most common models.

Water Ingress into Motor Chamber

Underground motor chambers accumulate water over time — particularly on properties with poor drainage, high water tables, or after heavy Johannesburg summer storms. Water in the motor chamber corrodes the control board, motor winding, and electrical connections. Signs include intermittent gate failure after rain and visible rust or corrosion when the motor housing lid is opened. Prevention: ensure the motor chamber lid seal is intact and that surface drainage around the gate post directs water away from the motor position.

Control Board Failure

DTS underground control boards fail from two causes: load-shedding surge damage and water corrosion. The surge damage fault pattern is identical to above-ground DTS motors. Water-related board failure is typically more extensive — corrosion can affect multiple board components simultaneously. We assess whether board replacement is viable or whether the motor unit needs full replacement.

Arm Bracket Corrosion

The DTS underground arm and bracket are buried in soil and subject to constant moisture exposure. Corrosion on the arm pivot points and bracket connections causes stiff, grinding gate movement over time. Regular inspection of the motor chamber and bracket connections — every 12 months — allows early intervention before corrosion causes full mechanism failure. We carry DTS underground arm components for most models.

DTS swing Gate Motor

DTS produces above-ground swing gate motors using a linear actuator arm for single and double-leaf hinged gates. The DTS swing gate range is popular in older Johannesburg residential properties where the driveway layout suits a swing gate. The DTS swing motor is an economical alternative to the Centurion R5 and Gemini swing systems — with lower purchase and repair costs, though slightly less robust build quality on the actuator arm.

Common Faults

Limit Switch Misalignment

The most common DTS swing gate fault. The limit switches defining the open and closed positions shift easily if the gate has been manually pushed during a power outage, or if ground movement has shifted the gate post or hinge. Realignment is a straightforward on-site adjustment requiring no parts in most cases — and is our most common DTS swing gate callout.

Actuator Arm Failure

The DTS swing actuator arm extends and retracts to push and pull the gate leaf. The actuator's internal mechanism and seals degrade over time. The DTS actuator is less robust than the equivalent Centurion R5 or Gemini swing arms — particularly on heavier gates or high-cycle installations. Early signs include slow movement and inconsistent travel. Full actuator replacement is still significantly cheaper than replacing a premium brand equivalent.

Control Board Failure

Load-shedding surge damage is the primary cause of DTS swing gate board failure. For double-leaf installations, board failure on one motor typically stops both gates — the two motors are synchronised and neither operates independently. We carry DTS swing gate boards for most models.

Pivot Joint Wear

The DTS swing arm pivot joints wear faster than premium brands due to lighter construction. A worn joint causes knocking at the end of travel and progressively worsening play in the arm. Replacing worn pivot joints early prevents the wear from propagating to the actuator itself — a more expensive repair. We carry DTS pivot joint kits in stock.

Not sure which brand you have? Send a photo via WhatsApp to 061 402 6299 and we will identify your motor and quote before dispatching.

DTS Gate Motor Repairs Johannesburg Most Asked Comparison

DTS vs Premium Brands — Is DTS Worth It?

The question we get asked on almost every DTS callout. Here is our honest, experience-based answer — not a sales pitch for either option.

DTS Elite 600 Gate Motor

  • Lowest repair cost — parts cheap & available
  • Receiver failure is cheap to fix (R700–R1,400)
  • Straightforward installation and diagnosis
  • Good choice for budget-conscious buyers
  • Receiver more vulnerable to surge than Centurion
  • Build quality lower than Centurion or Gemini

Centurion D5-Evo Gate Motor

  • Better PCB surge protection (D5-Evo specifically)
  • Built-in load-shedding protection (Guardian mode)
  • More robust build quality and longer lifespan
  • Better resale value for the property
  • Supports more remotes (up to 50)
  • Two batteries needed — both must be replaced together
  • Higher purchase price

Paskwa Gate Repairs recommendation:

DTS is a legitimate choice for budget-conscious buyers and rental properties where minimising upfront cost is the priority. The repair economics are excellent — DTS is the cheapest brand to fix in Johannesburg. For owner-occupied homes where the gate is used multiple times daily, the Centurion D5-Evo offers better long-term value through better surge protection and longer lifespan. Whatever brand you choose, add a surge protector (R450–R900 fitted) — it pays for itself after a single prevented repair on any brand.

Brand-by-Brand Guide

Gate Motor Brands We Repair in Johannesburg

Common faults, repair cost ranges and parts availability for every major gate motor brand in South Africa.

Gate Motor Repair Services in Johannesburg
Learn More

Centurion D5 / D5-Evo Gate Motor

The Centurion D5 is an older, now outdated sliding gate motor, while the D5-Evo is its modern upgraded replacement designed for improved performance, reliability, and ease of use.

Both motors handle gates up to 500kg, but the D5-Evo offers significantly better features. It operates faster (opening a standard 4m gate in under 12 seconds), includes a reliable battery backup for load shedding, and has a smart LCD controller that simplifies setup and diagnostics

Best For

Residential sliding gates

Most Common Fault

Surge-damaged control board

Repair Cost Range

R1,800 – R6,500

Gate Motor Repair Services in Johannesburg
Learn More

Centurion D10 Smart Gate Motor

The Centurion D10 Smart gate motor is a heavy-duty sliding gate motor designed for large residential, commercial, and industrial gates. Built to handle gates up to 1000kg, it is ideal for high-traffic properties, estates, warehouses, and business premises requiring reliable automated gate systems.

This smart gate motor features a powerful 24V DC motor, delivering fast, smooth, and consistent performance. The D10 Smart includes advanced smart technology, allowing remote monitoring, mobile app control, and real-time diagnostics, making it one of the most intelligent gate motors in South Africa.

Best For

Heavy-duty / large gates

Most Common Fault

Motor winding failure

Repair Cost Range

R3,200 – R9,000

Gate Motor Repair Services in Johannesburg
Learn More

Centurion R5 / Vantage Gate Motor

The Centurion R5 and Centurion Vantage are both swing gate motors, but they are designed for different applications, performance levels, and gate types.

The Centurion R5 gate motor is a rotary arm swing gate motor ideal for domestic and light-industrial use, such as homes, complexes, and small business entrances. It is designed for gates up to 3.5m per leaf and ±250kg, offering smooth, quiet operation, battery backup, and easy installation.

Best For

Swing gates

Most Common Fault

Limit switch / ram seal

Repair Cost Range

R1,200 – R5,500

Gate Motor Repair Services in Johannesburg
Learn More

Nice ET Drive 500 / 1000 Gate Motor

The ET Drive 500 and ET Drive 1000 are sliding gate motors designed for different gate sizes and usage demands. Both are part of the ET Nice gate motor range, offering reliable gate automation systems with battery backup, making them ideal for South African load shedding conditions.

The ET Drive 500 gate motor is designed for residential sliding gates up to 500kg, providing a balance of performance, affordability, and ease of installation. It features a high-speed motor, advanced electronics with a backlit display, and built-in security features such as tamper alarms and rolling code receivers.

Best For

Budget sliding gates

Most Common Fault

PCB board failure

Repair Cost Range

R1,400 – R5,000

Gate Motor Repair Services in Johannesburg
Learn More

Gemini Standard / Pro Gate Motor

The Gemini Standard and Gemini Pro are both sliding gate motors designed for residential and light commercial use, but they differ in power, duty cycle, and performance level.

The Gemini Standard gate motor is a reliable residential sliding gate motor, typically designed for gates up to 400–600kg, making it ideal for homes and small complexes. It operates on a 12V DC system with battery backup, ensuring functionality during load shedding in South Africa. It is known for its affordability, ease of installation, and consistent everyday performance.

Best For

Residential / light commercial

Most Common Fault

Motor capacitor failure

Repair Cost Range

R1,200 – R4,500

Gate Motor Repair Services in Johannesburg
Learn More

DTS Sliding / Swing Gate Motor

DTS Sliding and Swing Gate Automation systems provide secure, durable, and efficient access control for residential, commercial, and industrial properties. Designed for smooth operation and long-lasting performance, DTS gate motors are engineered to handle heavy-duty use while ensuring safety and convenience.

The DTS Sliding Gate Motor is ideal for high-traffic entrances, offering fast, quiet, and reliable sliding gate operation with advanced anti-crush safety features, battery backup options, and smart control compatibility. It is perfect for driveways, estates, warehouses, and secure facilities requiring dependable automated access.

Best For

Residential

Most Common Fault

Remote receiver fault

Repair Cost Range

R1,000 – R4,000

Gate Motor Repair Services in Johannesburg
Learn More

Nice ROBUS / TOONA Gate Motor

The CAME ROBUS Sliding Gate Motor and CAME TOONA Swing Gate Motor are high-performance automation systems designed for reliable, safe, and long-lasting access control in residential, commercial, and industrial environments. Manufactured by CAME, a global leader in automation technology, these systems are known for their durability, smart features, and advanced safety engineering.

The ROBUS Sliding Gate Motor is built for intensive use, making it ideal for high-traffic entrances such as estates, business parks, and industrial facilities. It delivers smooth, fast, and quiet operation with intelligent control features, obstacle detection, and backup battery compatibility for uninterrupted access.

Best For

Light residential

Most Common Fault

Logic board failure

Repair Cost Range

R1,200 – R4,500

DTS Gate Motor Repairs Johannesburg Maintenance Guide

DTS Gate Motor Maintenance — Johannesburg

DTS motors are affordable to repair — but the right maintenance dramatically extends their life and reduces repair frequency. Here is what we recommend to every DTS owner in Johannesburg.

Call for a free quote

061 402 6299

24/7 Emergency Line Available

Keep safety sensors clean and aligned

DTS safety sensors are often installed at low height where they accumulate dust, cobwebs, and debris quickly. A blocked or misaligned sensor causes the gate to reverse unexpectedly or refuse to close — symptoms that can be mistaken for a motor fault. Clean sensor lenses monthly with a dry cloth. If the gate reverses consistently just before fully closing, check the sensors before calling for a technician.

Install a surge protector — most important for DTS

The DTS receiver module is the most surge-vulnerable component of any major gate motor brand we service in Johannesburg. A surge protector fitted to the motor's power input (R450–R900) absorbs the voltage spike when electricity is restored after load shedding — the exact spike that burns out the receiver. The DTS receiver replacement costs R700–R1,400. A surge protector pays for itself after a single prevented repair. We install these during every DTS callout — ask us to add one when you call.

Test battery backup monthly

Switch off your mains DB and try the remote. The gate should open and close normally on battery alone. Under Johannesburg's load-shedding conditions, DTS 7Ah batteries often fail within 12–18 months rather than the rated 2–3 years — the battery is repeatedly over-discharged through multiple daily outages. Proactive replacement (R650–R950) prevents the more frustrating scenario of a failed gate at the worst possible time.

Lubricate the rack and pinion every 6 months

Apply heavy-duty gear grease — not WD-40 — to the rack teeth and drive pinion on the motor every 6 months. An unlubricated DTS works harder, draws more current, and accelerates capacitor and motor wear. The DTS motor's build quality means it has less tolerance for mechanical stress than premium brands — lubrication is therefore proportionally more important on a DTS than on a Centurion.

Never overload the motor

DTS motors are rated conservatively — the Elite 600 for 600kg and the Arrow for 400kg. Installing a DTS on a gate heavier than its rating is the single most common cause of premature DTS motor failure. Overloading causes the motor to overheat, trips the thermal protection repeatedly, and destroys the capacitor within months. If your gate is close to or over the rated weight, upgrade to the DTS Elite 600 or consider a Centurion D5-Evo which handles the same gate size with more headroom

Where We Work

DTS Gate Motor Repairs Across All of Johannesburg

Same-day DTS gate motor repairs across every suburb in Johannesburg and wider Gauteng. Not listed? Call 061 402 6299 — we cover all suburbs.

  • $
    Alberton
  • $
    Douglasdale
  • $
    inanda
  • $
    Morningside
  • $
    Saxonwold
  • $
    Bedfordview
  • $
    East Rand
  • $
    Johannesburg
  • $
    Randburg
  • $
    Benoni
  • $
    Edenvale
  • $
    Kyalami
  • $
    Roodepoort
  • $
    Bryanston
  • $
    Fourways
  • $
    Melrose Arch
  • $
    Rosebank
  • $
    Centurion
  • $
    Hyde Park
  • $
    Midrand
  • $
    Sandton

Not listed? We cover all of Gauteng — call 061 402 6299 to confirm availability for your area.

Customer Reviews

What Our Customers Say

"My DTS Elite 600 remote stopped working after load shedding. Paskwa diagnosed the receiver fault in minutes and replaced it on the spot. Gate working perfectly and they also fitted a surge protector. Very efficient."
Riaan B.
"DTS Arrow was humming but not moving the gate. Called Paskwa — capacitor failure, replaced same day, R750 all in. Quick, honest, no upselling. Exactly what you want from a gate repair company."
Nomsa K.
"Our DTS underground motor started leaking oil and the gate was very slow. Paskwa replaced the hydraulic seals and the gate moves like new. They also checked the drainage around the motor — very thorough."
Grant V.

FAQs

Frequently Asked Questions — DTS Gate Motor Repairs Johannesburg

How much does DTS gate motor repair cost in Johannesburg?

DTS gate motor repairs range from R350 for a remote reprogram to R4,500 for a full motor supply and installation. The most common repair — receiver module replacement after load-shedding surge damage — costs R700–R1,400. Full control unit (PCB) replacement costs R1,000–R2,500. Battery replacement is R650–R950. DTS is the most affordable brand to repair in Johannesburg. We provide a free diagnosis and quote before starting any work. Call 061 402 6299.

Why did my DTS remote stop working after load shedding?
The DTS receiver circuit is vulnerable to load-shedding restoration surges. When electricity is restored after an outage, the voltage spike burns out the receiver module — leaving the main control board functional. The gate can still be opened using the physical button on the motor, but the remote doesn't work. Receiver replacement costs R700–R1,400 and is a same-day repair. A surge protector (R450–R900 fitted) prevents this happening again.
Is DTS a good gate motor for Johannesburg?

DTS is a solid, affordable option well suited to budget-conscious buyers and rental properties. Its main strengths are the lowest purchase price and lowest repair cost of any major gate motor brand in Johannesburg. Its main weakness is receiver vulnerability to load-shedding surge damage — which is easily mitigated by fitting a surge protector on installation (R450–R900). For owner-occupied homes used multiple times daily, the Centurion D5-Evo offers better long-term value through better surge protection and longer lifespan.

Should I repair my DTS gate motor or upgrade to Centurion?
Repair if the fault is the receiver, control unit, battery, or capacitor — all cheap, same-day repairs. Upgrade to Centurion D5-Evo if: the motor is over 10 years old and has had multiple receiver failures, the gate is used more than 30 times per day, or you want load-shedding protection built into the motor itself. We give an honest on-site assessment — there is no upselling pressure either way.
How do I manually open my DTS gate when the motor fails?

The DTS motor has a manual release mechanism — usually a lever or key slot on the motor housing. Engaging the release disengages the drive pinion from the rack, allowing the gate to be pushed open by hand. Re-engage by reversing the release. If you can't locate the release, call 061 402 6299 and we will walk you through it over the phone at no charge.

How long does a DTS gate motor last in Johannesburg?

A DTS Elite 600 typically lasts 7–12 years under normal residential use. Proper maintenance — surge protector fitted, battery replaced every 12–18 months, rack lubricated every 6 months, motor never overloaded — can extend this to 12+ years. DTS motors are particularly economical to maintain because parts are cheap and widely available.

Do you repair DTS gate motors in Johannesburg?

Yes. We repair and install DTS Elite 600, DTS Arrow, DTS swing gate and DTS underground gate motors across all of Johannesburg and Gauteng. We carry control units, receivers, batteries, capacitors and remotes in stock for same-day repairs. Call 061 402 6299 any time — 24/7 emergency line available.

Have a different Question?

Get In Touch

Get Your DTS Gate Fixed Today

DTS isn't the only brand we specialise in. We repair and install every major gate motor brand across Johannesburg.

  • 061 402 6299 — Call or WhatsApp
  • info@paskwagaterepairs.co.za
  • 7 Poplar Avenue, Broadacres, Sandton, 2021
  • Mon–Fri: 07:00–18:00 | Sat: 07:00–14:00
  • 24/7 Emergency Line available

Book a Free Quote