📍We Are Based In Gauteng

Call us

061 402 6299

Email

info@paskwagaterepairs.co.za

Location

7 Poplar Ave Broadacres 2021

Electric Fence Repairs —Edenvale & Northern Suburbs

Electric Fence Repairs Edenvale

Electric fence repairs Edenvale — energiser repairs, fault-finding, dead batteries & COC certificates. Surge damage fixed same-day. SANS 10222-3 work. 6-month guarantee.

Call For a Free Quote

061 402 6299

Request a Callback

WHY EDENVALE FENCES FAIL

Electric Fence Repairs Edenvale — Diagnosed Properly, Fixed Once

An electric fence has one job: to deter, detect and delay an intruder before they reach your home or premises. The moment it stops pulsing, alarms for no reason, or drops to a voltage too low to deter anyone, that job stops — and in Edenvale, a busy East Rand suburb close to OR Tambo with a heavy mix of homes, estates and commercial property, a dead perimeter is a real gap. Paskwa Gate Repairs travels to Edenvale from our Broadacres base, and electric fence repairs Edenvale residents and businesses call us for are part of our planned East Rand work.

We are honest about the distance: Edenvale is around forty-five minutes from our base, so we do not promise to be there within the hour. What we bring instead is genuine specialist depth across Nemtek, JVA and Stafix, proper diagnostic equipment, and transparent pricing, on a planned same-day or next-day visit with the stock on the vehicle. Edenvale's modern Greenstone Hill estates and complexes run multi-zone systems where isolated zone faults are the typical call, while the established streets of Eastleigh, Dowerglen and Illiondale bring the familiar vegetation shorts and surge-damaged boards. The commercial and light-industrial pockets near Sebenza and the airport need perimeters that genuinely alarm to monitoring.

Because we plan the trip and arrive prepared, electric fence repairs in Edenvale are almost always a single visit — diagnosis, repair and re-test in one. Our approach does not change with the distance: a free telephonic diagnosis first so you know the likely cause and an honest price before we travel, then a proper on-site fault-find and a repair priced to the part that failed.

Full Service List

Every Electric Fence Repair We Do in Edenvale

Whatever has failed, this is the full scope of electric fence repairs Edenvale property owners need — covering freestanding homes, townhouse complexes, security estates, office parks, warehouses and industrial yards, on wall-top, palisade-top, freestanding and roof-perimeter systems.

Energiser Repairs & Replacement

The energiser is the heart of the fence — the unit that turns mains or battery power into the high-voltage pulse on the wires. When it takes surge damage, stops pulsing, or throws a fault light, we repair the board where that is economical and swap it for a like-for-like unit when it is not. We carry Nemtek, Stafix and JVA stock on the vehicle for same-day Edenvale energiser (energizer) swaps.

Fault-Finding & Fence Testing

Shorts, breaks, sagging strands, cracked insulators, corroded joints and dead zones — we trace the exact point of failure with a directional fault-finder rather than guessing and replacing parts that were never broken. It is proper electric fence fault finding in Edenvale, not parts-swapping, and it is what keeps the bill honest.

Battery Replacement

Every grid-powered energiser has a backup battery so the fence keeps working through a power cut. Gauteng's frequent outages wear those batteries out faster than their rated life. We test the battery under load — not just at rest — and fit a fresh sealed unit so you are protected during outages. Need a quick electric fence battery replacement in Edenvale? It is usually a same-day job.

Surge and lightning damage repair

The voltage spike when the power returns after an outage, and the Highveld's summer lightning, are the two biggest killers of energiser boards in Edenvale. We repair surge-damaged units, replace popped lightning diverters, and fit surge protection so the next spike does not cost you another energiser.

Earthing & Voltage Correction

A weak or "won't-shock" fence is almost always an earthing problem, not an energiser problem. We test earth resistance, add or re-drive earth stakes, and correct the lead-out so the system delivers a proper deterrent pulse end to end.

Electric Fence COC Certificates

We arrange Electric Fence System Certificates of Compliance through a registered installer for property sales and new installations across Edenvale — see the dedicated COC section below for exactly when you need one.

Know Your System

How an Electric Fence Works — and Where It Fails

Understanding the four parts of an electric fence makes every fault on this page easier to picture, and helps you describe the problem accurately when you call. Each part fails in its own characteristic way.

1. The energiser

The energiser takes mains power (or battery, or solar) and converts it into a short, high-voltage pulse — roughly one a second — sent down the live wires. A healthy unit pulses around 7,000 to 9,000 volts on open circuit and ticks audibly. When the energiser fails, it is usually the internal circuit board, and usually because of a power surge — the most expensive single component and the one most often killed by Gauteng's outages. This is the single most common point of failure in Edenvale.

2. The live wires & bobbins

High-tensile galvanised strands carry the pulse around the perimeter, held off the wall on insulated bobbins. Wires break, sag, corrode or get cut; bobbins crack under UV. A single bad strand can short the whole zone to earth, which is why one fault often kills voltage everywhere. his is the single most common point of failure in Edenvale.

3. The earth (ground) system

Earth stakes driven into the ground complete the circuit when something touches a live wire. The shock is current flowing through to the earth wires and back to the energiser. If the earth is poor — too few stakes, dry soil, a corroded lead — the fence has voltage but no bite, and Highveld winters expose every marginal earth system. Edenvale​'s dry winter soil makes earthing faults worse.

4. The lightning diverter

A protective component that shunts lightning and surge energy to earth before it reaches the energiser. When it "pops," its plates can fuse into a dead short to earth — instantly dropping fence voltage to nothing. A blown diverter mimics a major fence fault, so we test it early.

5. The alarm & backup battery

The alarm output signals your panel and armed response when a wire is cut or shorted — this, not the shock, is what actually protects you. The internal 12V battery keeps everything running through a power cut. A flat battery or a disconnected alarm output leaves you exposed without you ever knowing.

So where is your fault?

Dead overnight after a power cut → energiser. Constant alarm → a wire shorting to earth. Weak shock → earthing. No alarm when cut → alarm wiring. We test all five, in order, on every call-out.

Brand-by-Brand Guide

Electric Fence Energiser Brands We Repair & Supply in Edenvale

We service every major energiser sold in South Africa and carry the common units on the vehicle for same-day Edenvale swaps. Below is the model-level detail — joule ratings, zones and the faults we see most — for each brand you are likely to have on your wall.

Nemtek — Wizord, Merlin, Stealth & Druid Electric Fence

Nemtek is the most common security energiser on Edenvale homes and complexes, and the brand we replace most often. The Druid LCD range uses Adaptive Power Technology (APT), which senses how much power the fence can take before it arcs. We repair board-level faults where economical and stock the popular units for same-day replacement.

Faults we see most: surge-killed Wizord and Druid boards after a power cut; 'service / fail' lights on LCD units; popped lightning diverters; flat backup batteries. Most are a same-day fix.

Stafix Econoflex electric fence energisers

Stafix is reliable, SANS-approved and widely installed across Edenvale — and because Stafix and Nemtek share most installation hardware, a Stafix board swap rarely means re-doing the fence. We follow the Stafix six-step fault-finding sequence: power supply and battery, energiser open-circuit, lightning diverter, lead-out, earth, then the fence line.

Faults we see most: blown input fuses and HV protection after surges, popped lightning diverters reading a dead short to earth, batteries that will not hold charge, and low open-circuit output indicating a board fault.

Gallagher B10, B30, and B80 electric fence energisers

Gallagher energisers are built for long fence lines and heavy vegetation load — the right choice for Edenvale's larger plots and estate boundaries that run to several kilometres of wire. As a rule of thumb, one joule drives roughly 10 km of clean wire, far less where vegetation competes.

Faults we see most: voltage drift and arcing at gates on long runs, under-sized energisers struggling with summer vegetation, and earth systems that worked in wet weather but fail in the dry winter.

DSC and Risco electric fence alarm systems

The shock deters; the alarm protects. The alarm output signals your armed-response company when a wire is cut or shorted — and on far too many Edenvale fences it was never wired in. We integrate the output into DSC and Risco panels, set the gate-bypass, and confirm the trigger end to end.

The test that matters: if a cut wire does not trigger your alarm, the fence is a deterrent only — not a detection system. We make sure it actually signals.

Solar electric fence energisers

A solar energiser runs entirely off its own panel and battery, so it never sees the mains surge that kills grid-powered units when power returns. For Edenvale properties that have lost two or three energisers to surges, converting to solar is the permanent fix, and it is essential on off-grid plots. We supply, install and service solar systems.

Faults we see most: charge-controller failures, batteries past their life, and panels shaded or under-sized for the load.

THE NUMBER-ONE CAUSE

What Power Surges & Power Cuts Do to Your Edenvale Fence

If you take one thing from this page, take this: the most common reason an electric fence dies in Edenvale is not age, weather or wear — it is the voltage surge that hits when the power comes back on after an outage. The energiser is full of sensitive electronics, and the spike on restoration punches straight through an unprotected board.

This is why so many Edenvale call-outs cluster in the hours after the power returns. The fence was fine all through the outage, running on its battery, and then died the instant the grid came back. The tell-tale sign is a red or dead light on the energiser after power restoration — a classic surge-damaged board.

How we stop it happening again

Repairing the board is only half the job. We fit a surge protector on every board replacement, check that the lightning diverter is intact and correctly earthed, and where a property has lost multiple energisers we recommend converting to solar.

It is worth thinking about your perimeter the way you would think about any other sensitive electronics in the house. People fit surge protection to televisions, computers and gate motors, yet leave the one device whose whole purpose is security exposed to every restoration spike. The energiser deserves the same protection — and unlike a TV, when it fails it leaves your home undefended at exactly the moments, during and after outages, when opportunistic crime tends to rise across Edenvale. Building proper surge protection into the fence is one of the cheapest, highest-value security upgrades you can make.

So where is your fault?

  • $
    Surge protector on the mains input — absorbs the restoration spike.
  • $
    Battery replaced on schedule — tested under load, swapped before it strands you.
  • $
    Convert to solar — energiser runs off-grid and never sees the surge again. Quoted on assessment.
  • $
    Annual re-tension — corrects the slow sag from heat and power cycling.

CATCH IT EARLY

Early Warning Signs Your Electric Fence Needs Attention in Edenvale

Most electric fence failures in Edenvale do not happen out of nowhere. The fence usually warns you for weeks before it dies completely, and learning to read those early signs lets you book a low-cost repair on your own schedule instead of an emergency call-out the morning after a break-in attempt. These are the signals worth acting on.

  • $
    The energiser light flickers between green and red, or the status light is not the steady green it used to be — an early sign of a struggling board or an intermittent fault on the line.
  • $
    The audible tick becomes irregular, faint or stops altogether, even though the fence still seems to work — the pulse is weakening before it fails.
  • $
    The fence alarms more often than it used to, particularly in wind or after rain, which points to vegetation creeping onto the wire or an insulator beginning to leak to earth.
  • $
    The voltage on your fence tester has crept down over the months from a healthy 7–9 kV toward 5 kV or less — the deterrent is quietly eroding.
  • $
    The backup no longer carries the fence through a full power cut, a clear sign the battery is near the end of its two-to-three-year life.
  • $
    Insulators look cracked, yellowed or brittle, brackets are working loose from the wall, or strands have begun to sag — the mechanical wear that eventually becomes an electrical fault.

LOAD SHEDDING & SURGE DAMAGE

Electric Fence Surge Damage After Load Shedding — Edenvale

Edenvale has lived through years of load shedding and unplanned outages, and electric fences have paid the price. Every time the power cycles off and back on, the restoration surge tests your energiser's protection. Boards that survive ten cycles fail on the eleventh.

If your fence stopped working after load shedding, the sequence is almost always the same: the power went out, the fence ran on battery, the power came back with a spike, and the energiser's board took the hit. If the indicator light is red or off after the power returned, it is almost certainly a surge-damaged board — and we carry Nemtek, Stafix and JVA stock for same-day energiser (energizer) replacement across Edenvale.

Why Load Shedding Kills Energisers

When Eskom restores power after a cut, the returning surge travels through your mains line and into the energiser's circuit board — the same spike that destroys gate-motor boards and DSTV decoders. The energiser absorbs it and dies, leaving a red or dead indicator light by morning. Fences installed without a surge protector on the mains input are completely unprotected every single time the power comes back.

What to Look For

After a load-shedding outage, check the energiser indicator: a red light or no light at all is almost always a surge-damaged board. The fence will be completely dead — no ticking, no shock, and if wired to your alarm, no detection either. This is a security gap that needs same-day attention. Call 061 402 6299 and describe the light — we'll confirm the fault over the phone and bring the right replacement unit.

Electric Fence Energiser Repair & Replacement Edenvale

We carry Nemtek, Stafix and JVA energiser stock on the vehicle for same-day swaps across Edenvale and surrounding suburbs. Board-level repair is quoted where economical (R600–R1,500); where the board is beyond repair, a like-for-like replacement is fitted (R1,800–R6,500) so your existing brackets, wire and keypad stay in place. A surge protector is fitted at the same visit to prevent a repeat.

Permanent Fix: Convert to Solar

A solar energiser runs entirely off its own panel and battery — it never sees the mains spike that destroys grid-powered units. If you've replaced the same energiser two or three times, converting to solar is the permanent solution. We supply, install and certify solar electric fence systems across Edenvale, Fourways and Midrand. We'll quote solar alongside a surge protector at the same free assessment so you can weigh once-off cost against repeat repairs.

Fence dead after load shedding? We can usually confirm the fault over the phone.

Call 061 402 6299 or WhatsApp a photo of the energiser light — we'll give you a likely cause and price guide before anyone drives out. Same-day energiser replacements available acrossEdenvale, Bryanston, Fourways and Midrand.

Before You Call

Three Safe 60-Second Checks You Can Do Yourself

Some electric fence faults have a simple cause you can spot from the ground — no tools, no touching the wires. Doing these quick checks first can save you a call-out, or at least help us bring the right part. Never touch the fence wires, open the energiser, or attempt any wiring yourself — an electric fence carries several thousand volts, and by law only a registered installer may work on the system.

  • $
    Read the energiser light. Find the energiser (usually in the garage, on a wall, or in a weatherproof box). Green or steady = powered. Red, flashing fault, or no light = a board or power problem. Note exactly what it shows — it tells us a lot before we arrive.
  • $
    Check the mains and the switch. Confirm the plug is in, the wall switch is on, and the energiser's own on/off switch hasn't been knocked off. After a power cut, a tripped DB or a switched-off plug is a surprisingly common "fault."
  • $
    Look along the wires for the obvious. From a safe distance, scan for a snapped or hanging strand, a tree branch or creeper touching the line, or a bracket that's come loose. A visible short like this is usually the cause of constant alarming — and a quick, cheap fix.

Done the checks? Tell us what you found

Send a photo of the energiser light and anything you spotted on the wire — we'll give you a likely cause and price before we drive out to Edenvale.

Legal Requirement — South Africa

The Electric Fence COC — What Edenvale Owners Actually Need to Know

The Electric Fence System Certificate of Compliance is one of the most misunderstood things in this trade, and getting it wrong costs Edenvale sellers time and money at exactly the wrong moment. Here is the plain-English version.

Under the Electrical Machinery Regulations of the Occupational Health and Safety Act, an Electric Fence System COC is required for any new electric fence installation, and whenever a property with an electric fence changes ownership after 1 October 2012. It is a separate certificate from the normal electrical COC — a property sale with an electric fence needs both.

Only an installer registered with the Department of Employment and Labour may issue an Electric Fence System COC. The certificate confirms the system complies with the relevant standards, principally SANS 10222-3 and SANS/IEC 60335-2-76.

The Certificate of Compliance (COC) for electric fences is a legal requirement under the Electrical Machinery Regulations of the Occupational Health and Safety Act (Act 85 of 1993). Without a valid COC, your electric fence is illegal and your insurer may refuse to pay out in the event of a claim involving the fence.

When do you need one?

You need a valid electric fence COC when an electric fence is newly installed, and when a property with an electric fence changes ownership — the certificate must be in place for transfer. You also need a fresh one after a significant alteration, extension or re-string, or when the energiser is replaced.

Who may legally issue it?

An electric fence COC can only be issued by an installer registered with the Department of Employment & Labour as an Electric Fence System Installer. A general electrician may not issue one. A COC signed by an unregistered person is not valid — so always confirm registration before you pay.

The detail competitors miss

Minor repairs — replacing broken wires or bobbins — do not require a new COC. Replacing the energiser does. An existing valid COC can transfer to a buyer only if nothing has been altered since it was issued. This nuance saves Edenvale sellers real money, so we never push an unnecessary re-certification.

What SANS 10222-3 requires

The standard sets out the rules: a properly earthed energiser, correct strand spacing and tension, warning signs at intervals not exceeding 10 metres on public boundaries, angled brackets no more than 45° and on the inside of the boundary, and that barbed or razor wire must never be electrified.

Operating without a valid COC is illegal — and can void your insurance

If someone is injured by an electric fence that has no valid COC, the property owner can be held liable, and most home insurers will not pay claims involving a non-compliant electrical installation. For a Edenvale property sale, transfer cannot proceed without it. We inspect your fence against SANS 10222-3, repair anything that fails, and arrange certification through a registered installer. Call 061 402 6299 for a COC inspection.

Every Property Type

Electric Fence Repairs for Edenvale Homes, Complexes & Commercial Sites

The fault types are similar, but the priorities, access and compliance responsibilities differ by property type. Here's how we handle each.

Greenstone estates and complexes

The Greenstone Hill estates and the surrounding townhouse complexes run multi-zone JVA or Nemtek systems, often tied into estate access control. The common call is an isolated zone fault, and for common-property fencing the COC is the body corporate's responsibility. We isolate and repair the affected zone without dropping the rest, confirm the alarm output, and report to the managing agent.

Established freestanding homes

The older Edenvale suburbs — Eastleigh, Dowerglen, Illiondale, Edenglen — carry long-standing wall-top systems on Nemtek, Stafix or JVA energisers. Vegetation shorts, cracked insulators, surge-killed boards and tired batteries are the recurring faults, all single-visit repairs because we arrive with the stock on the vehicle.

Commercial and airport-edge premises

Toward Sebenza and the OR Tambo edge, Edenvale's commercial and light-industrial premises need perimeters that alarm reliably after hours. We verify the alarm output genuinely triggers your monitoring on a cut or short, document the work for insurers, and service to scheduled windows so cover is never down.

EDENVALE THROUGH THE YEAR

Seasonal Electric Fence Faults in Edenvale — and How to Stay Ahead

Edenvale's fences fail in seasonal patterns, and recognising them helps you head off a dead perimeter before it happens. The faults we are called to in January are not the ones we see in July, and a fence that sailed through summer can quietly fail in the first cold, dry week of winter.

Summer — lightning, surges and vegetation

The Highveld's summer thunderstorms are brutal on electric fences. Direct and nearby strikes punch through unprotected boards and pop lightning diverters, and the storms that knock the power out bring a restoration surge when it returns. At the same time, summer growth is at its peak across the established Eastleigh and Dowerglen streets, pushing new foliage onto the wires faster than ever and causing shorts and nuisance alarms. Summer is when surge protection, an intact diverter and a quick vegetation trim earn their keep.

Winter — dry earth and weak shocks

Winter brings the opposite problem. Months without rain dry the Highveld soil to dust, and a dry earth is a poor earth. Fences that shocked perfectly in February start reading full voltage but giving little real bite, because the circuit can no longer complete cleanly through the ground. This is the season for earth-system checks and extra earth stakes driven deeper to reach moisture. Cold also stresses tired backup batteries, so a marginal battery often fails on the first frosty night.

A quarterly maintenance visit catches both cycles — surge protection and vegetation before summer, earthing and batteries before winter — which is exactly why a maintained Edenvale fence rarely produces an emergency call.

How a Repair Works

From Your Call to a Working Fence

Call or WhatsApp

Tell us the symptom — red light, constant alarm, no shock — or send a photo of the energiser. Every electric fence repair in Edenvale starts with a free telephonic diagnosis: we give you a likely cause and an honest price range before anyone drives out.

Same-Day Diagnosis

A technician reaches most of Edenvale within the hour. We test the energiser, the earth and the fence line with a calibrated tester and a directional fault-finder, and find the actual fault — not a guess.

Fixed Price, Then Repair

You get a firm price before we touch anything. With common spares and energisers on the vehicle, the majority of Edenvale repairs are completed in the same visit. No surprises, no upsell to a fence you don't need.

Test, Sign Off & Guarantee

We re-test every zone for SANS 10222-3 voltage and earthing, confirm the alarm output triggers correctly, and back every electric fence repairs Edenvale job with a 6-month guarantee. COC arranged where the job calls for it.

Self-Diagnosis Guide

What's Wrong With My Electric Fence? A Edenvale Symptom Guide

Match your symptom to the likely cause below. For each one you will find what we test on site, the fix, and an honest price guide. Prices are guides only — your exact quote follows a free diagnosis. Most of these are same-day repairs across Edenvale. Call 061 402 6299, or send a photo of the energiser display on WhatsApp and we will tell you what it is before we drive out.

  • $
    Energiser LED is red or off
  • !
    Likely Cause
  • $
    Energiser board failure (often surge damage) or no mains power
  • $
    Fence alarming constantly
  • !
    Likely Cause
  • $
    Wire shorting to earth — vegetation, fallen bracket or damaged insulator
  • $
    No voltage on fence tester
  • !
    Likely Cause
  • $
    Broken wire, damaged insulator or dead energiser
  • $
    Low voltage reading (under 6kV)
  • !
    Likely Cause
  • $
    Wire sagging to vegetation, poor earthing or weak energiser
  • $
    Fence works but battery doesn't
  • !
    Likely Cause
  • $
    Dead internal battery or faulty charging circuit
  • $
    False alarms — no obvious cause
  • !
    Likely Cause
  • $
    Wire tension too low, vegetation contact or wildlife interference
  • $
    One zone alarming, others fine
  • !
    Likely Cause
  • $
    Broken wire or shorted insulator in that zone only
  • $
    Energiser on, no alarm when touched
  • !
    Likely Cause
  • $
    Insufficient output — undersized energiser or poor earthing
  • $
    Physical wire damage (vandalism)
  • !
    Likely Cause
  • $
    Cut or pulled wire — criminal damage

Electric Fence Installation - How It Works

Electric Fence Installation Edenvale & Northern Suburbs

Whether you are building a new wall, upgrading a tired system, or adding electric fencing to a property that has never had it, we design, supply, install and certify electric fence systems across Edenvale and the surrounding northern suburbs. Electric fence installation Edenvale property owners can rely on, with the COC issued on completion.

Wall-top home systems

The standard residential install is a wall-top system of alternating live and earth strands on a single-zone energiser, sized to your wall length and earthed properly for the Highveld's dry winters. We match the energiser joule rating to the perimeter so the fence holds full voltage end to end, fit surge protection from day one, and tie the alarm output into your existing DSC or Risco panel.

Multi-zone complex and estate systems

For complexes and estates around Edenvale we install zoned JVA or Nemtek systems with keypad control and per-zone monitoring, so a fault or breach in one section is pinpointed instantly rather than dropping the whole perimeter. These are designed in consultation with the body corporate and certified as a complete system.

Upgrades and compliance

If your current fence pre-dates modern surge protection, runs an original board with no diverter, or has been altered without a fresh COC, we upgrade it to current standards — often re-using your existing brackets and wire to keep the cost down — and issue the COC on completion. This is the sensible move before selling a Edenvale property.

Free Site Assessment

A technician visits your property, measures the perimeter, assesses the wall height and condition, identifies zones, and recommends the correct energiser size and strand count. The assessment is completely free and carries no obligation. We usually visit within 48–72 hours of your call.

Detailed Written Quote

You receive a full itemised quotation covering energiser supply, brackets, wire, insulators, warning signs, earthing, labour and the COC certificate. No hidden costs. We explain every line item. Quote turnaround is typically same day or next business day after the site visit.

Installation (1–3 Days)

Our crew installs the bracket system, string the wire, connect the energiser, install all earthing, fit warning signs at the required SANS 10222-3 intervals, and integrate with your alarm system. A standard residential property (500–800m) typically takes 1–2 days. We clean up completely on completion.

Testing and COC Certificate

We test every zone with a calibrated fence tester to confirm compliance with SANS 10222-3 voltage, pulse rate and earthing requirements. A valid, signed COC certificate is issued to you on the same day as completion. The COC includes the installer's registration details and is legally valid for property transfer purposes.

Preventive Maintenance

Electric Fence Maintenance — Edenvale Guide

Most electric fence repairs in Edenvale are avoidable. A maintained fence holds voltage, stops nuisance-alarming and keeps your COC valid. Our annual contract from R2,400 a year covers four quarterly visits and a written report, and works out cheaper than the emergency call-outs it prevents.

Call for a free quote

061 402 6299

24/7 Emergency Line Available

Wire tension check and re-tensioning

Wire loses tension in Edenvale's heat and through repeated power cycling. Sagging strands touch vegetation, causing false alarms and weak deterrence. We check and re-tension every strand.

Earthing system inspection

Poor earthing is the number-one reason a fence shocks weakly. A good earth needs at least three galvanised stakes in moist ground. We test earth resistance and add or re-route as needed.

Insulator and bracket inspection

UV perishes insulators within three to five years; cracked insulators short the wire and drain output. We inspect and replace any that are cracked, loose or corroded.

Battery backup test and replacement

We test the backup battery under load, not just at rest, and replace it before it leaves you exposed during an outage. Repeated power cuts shorten its life well below the rated span.

Customer Reviews

WHAT EDENVALE CUSTOMERS SAY

“Most northern-suburb companies wouldn't travel to us. Paskwa booked a slot, arrived with the energiser on the van and replaced our surge-damaged board the same day. Honest about the drive from the start.” — Homeowner, Dowerglen

“A zone on our Greenstone Hill complex kept alarming. They planned the visit, isolated and repaired it without affecting the other units, and sorted our body-corporate COC. Worth it.” — Trustee, Greenstone Hill

“Our premises near Sebenza had a fence that never alarmed to monitoring. They found the output had never been wired in and connected it properly. Exactly what we needed.” — Facilities manager, Edenvale

FAQs

Electric Fence Repairs Edenvale — Frequently Asked Questions

Do I Need a COC Certificate for My Electric Fence?

Yes. The Electrical Machinery Regulations under the Occupational Health and Safety Act require a Certificate of Compliance (COC) for all new electric fence installations and when a property with an existing electric fence changes ownership. Operating without a valid COC is illegal, and most insurers will not pay claims involving a fence without a COC. Repairs Plus issues COC certificates on completion of all new installations. — call 061 402 6299

Why Is My Electric Fence Not Working After Load Shedding?

The voltage surge when the power comes back after load shedding burns out the energiser's internal circuit board — the single most common electric fence fault we see across Edenvale. If the indicator light is red or off after the power returned, it is almost certainly a surge-damaged board. We carry Nemtek, Stafix and JVA stock for same-day energiser (energizer) replacement. Call 061 402 6299 and we will confirm it over the phone

How Many Strands Does My Electric Fence Need?

SANS 10222-3 specifies a minimum of 5 live strands for a compliant installation. Most Johannesburg residential installations use 6–8 strands for better coverage. The strands must be properly spaced, tensioned and earthed, and warning signs must be displayed at regular intervals. All our installations comply with SANS 10222-3 and include a COC certificate.call 061 402 6299 for emergency repair.

My fence alarms constantly — what's wrong?

Constant alarming almost always means a wire is shorting to earth — vegetation touching the line, a sagging strand, a fallen bracket or a cracked insulator. We fault-find the affected zone and clear or repair it, usually R650–R1,400. It's rarely the energiser itself when the symptom is over-alarming rather than no power.

Can I Install an Electric Fence Myself?

No. Electric fence installation in South Africa must be carried out by a registered installer under the OHS Act Electrical Machinery Regulations. DIY installation is illegal and will result in an invalid COC — which is required by law and for insurance purposes. If someone is injured by an illegally installed fence, the property owner faces criminal liability.

How Long Does Electric Fence Installation Take?

A standard residential electric fence installation in Johannesburg takes 1–3 days depending on perimeter length and complexity. We usually start within 48–72 hours of the free site assessment. The COC certificate is issued on the day of completion.

Why does my fence have power but no shock when touched?

A fence that reads voltage but doesn't deliver a proper shock is nearly always an earthing problem — the most common cause of weak output. A good earth needs at least three galvanised stakes driven into moist ground. We test earth resistance and correct it; sometimes the energiser is also undersized for the line length and needs upsizing.

Is Your Electric Fence Work Guaranteed?

Yes. All parts and workmanship carry a 6-month guarantee. New installations also carry the COC certificate which confirms compliance with SANS 10222-3 on the day of completion. If any fault develops within 6 months of our work, we return and fix it at no charge

Can you repair my brand of energiser?

Yes — we work on Nemtek (Wizord, Merlin, Stealth, Druid, Agri), Stafix, JVA, Gallagher and others, plus solar energisers and DSC/Risco fence-alarm integration. Where a board is beyond economical repair, we replace it with a like-for-like unit so your existing brackets, wire and keypad stay in place.

Should I repair or replace my electric fence?

Most "dead" fences need a single part — an energiser, a battery, a wire or an earth fix — not a new installation. We test first and quote you on the actual fault. If a full re-string or new energiser genuinely is the right call, we show you why on the tester. We don't upsell a R25,000 installation to fix a R900 fault.

How much does an electric fence repair cost in Edenvale?

It depends on the fault. A battery replacement is typically R650–R1,200, an energiser board repair R600–R1,500, and a full energiser replacement R1,800–R6,500 depending on the model. Call-out and diagnosis is from R450 and is waived when you proceed with the repair. We give you an honest price range over the phone before driving out.

Do I need a COC for my electric fence in Edenvale?

You need an Electric Fence System Certificate of Compliance for any new installation, and whenever a property with an electric fence is sold (for systems installed or transferred after 1 October 2012). It is separate from the normal electrical COC. Minor repairs do not need a new one, but replacing the energiser does. We arrange certification through a registered installer.

Do you offer same-day or emergency electric fence repairs in Edenvale?

Yes. We are based in Broadacres and run a 24/7 emergency line, so for electric fence repairs Edenvale we reach most suburbs quickly and carry common energisers and spares on the vehicle. If your fence is down after a break-in attempt, call 061 402 6299 straight away.

Why does my electric fence keep beeping and how do I stop the alarm?

A beeping energiser has latched a fault — usually a wire shorting to earth, a low backup battery, or a tamper/cut detection. On keypad units you silence it by entering your PIN, but that only mutes the symptom; the fault stays until it's fixed. We read the fault on the LCD where fitted, isolate the zone that's dragging the voltage down, and clear the actual cause so it stops for good rather than beeping again the next night.

How often should an electric fence be serviced in Edenvale?

Quarterly is ideal given the Highveld's seasonal swings — surge and vegetation pressure in summer, dry-earth and battery stress in winter. At minimum, an annual service keeps voltage, earthing and the alarm output in check and keeps your COC position clean. Our maintenance contract from R2,400 a year covers four visits and a written report.

Can you convert my electric fence to solar so power surges stop killing it?

Yes. A solar energiser runs off its own panel and battery and never sees the mains spike that destroys grid-powered units when the power returns — so if you've lost two or three energisers to surges, converting to solar is the permanent fix. We supply and install solar systems and can fit a surge protector as a lower-cost interim step. We'll quote both options on a free assessment so you can weigh the once-off cost against repeat repairs.

My fence shows voltage but does not shock — why?

The circuit completes through the ground, so a fence can read kilovolts and still give no real shock if the earth system is weak. Edenvale's dry winter soil makes this worse. We measure earth-return voltage and add or re-drive earth stakes into moist ground to restore the bite.

Can you repair my brand of energiser?

Yes. We repair and replace all the major brands — Nemtek (Wizord, Merlin, Stealth, Druid), JVA (Z-series), Stafix, Gallagher and others — and integrate with DSC and Risco alarm panels. We carry the common Nemtek, Stafix and JVA units for same-day Edenvale replacement.

What does a red light on my energiser mean?

Green means normal and red or no light means a fault. After a power cut, a red light almost always points to a surge-damaged board — the most common reason for electric fence repairs Edenvale homeowners call us. We test open-circuit output to confirm: a healthy unit pulses around 7–9 kV.

Do you repair electric fences for complexes and body corporates in Edenvale?

Yes — we service the Greenstone Hill estates and the townhouse complexes around Edenvale, including multi-zone JVA and Nemtek systems, and coordinate with the managing agent. For common-property fencing the COC is usually the body corporate's responsibility, and we confirm where it sits before any work.

Do you do electric fence fault finding, or only full repairs?

Fault finding is the core of what we do. Many Edenvale call-outs are simply locating a short, a break or an earth fault on an otherwise healthy fence. We trace it with a directional fault-finder, show you the exact point of failure, and repair only what is broken — no unnecessary parts.

Have a different Question?

Get In Touch

Book an Electric Fence Technician in Edenvale

Speak directly to our dispatch team — no call centres. We travel to Edenvale from our Broadacres base, arrive prepared with the stock on the vehicle, and fix the fault in a single planned visit, residential and commercial.

  • 061 402 6299 — Call or WhatsApp
  • info@paskwagaterepairs.co.za
  • 7 Poplar Avenue, Broadacres, Sandton, 2021
  • Mon–Fri: 07:00–18:00 | Sat - Sun: 07:00–14:00
  • 24/7 Emergency Line available

Book a Free Quote

Where We Work

Electric Fence Repairs Across Edenvale

Based in Broadacres, we reach the whole Edenvale area fast for electric fence repairs, fault-finding and COC certificates — residential and commercial. These are the suburbs we cover most for electric fence repairs in Edenvale:

  • $
    Alberton
  • $
    Douglasdale
  • $
    inanda
  • $
    Morningside
  • $
    Saxonwold
  • $
    Bedfordview
  • $
    East Rand
  • $
    Johannesburg
  • $
    Randburg
  • $
    Benoni
  • $
    Edenvale
  • $
    Kyalami
  • $
    Roodepoort
  • $
    Bryanston
  • $
    Fourways
  • $
    Melrose Arch
  • $
    Rosebank
  • $
    Centurion
  • $
    Hyde Park
  • $
    Midrand
  • $
    Sandton

Not listed? We cover all of Gauteng — call 061 402 6299 to confirm availability for your area.